Eeva Countermarch Floor Loom

Eeva is supplied with a hanging beater and a standard Liisa bench. We include the cog wheel tensioning system as standard on the Eeva unless the customer requests otherwise. This means the weaver can advance the warp from the bench and adjust the tension to their exact requirements.  We call this the  “Goldilocks Tension System”.  Available only on  the  Liisa and Eeva floor looms, the  tension on your warp can be adjusted by  millimetres instead of  relying on a standard cog wheel only system. The connected worm gear means you,  the weaver have infinite control over  the tension  meaning you can get the tension “just right”!

Toika looms are made from beautiful Finnish Birch. This hardwood is air and kiln dried before being made into looms. The countermarch tie up gives a large shed with light treadling regardless of the tie up without the need for elaborate engineering. The side pieces of the Eeva are built in the factory and supplied in one piece. The loom is delivered in a plywood crate to accommodate this and ensures the loom arrives without damage. The simple and traditional construction of the looms means they are straightforward to build , exceptionally sturdy, and capable of weaving anything from fine lace to sturdy rugs and everything in between.

Traditional style looms like Eeva can also be tied up in the less traditional way to allow changing of the tie up to be made from the lamms rather than the treadles. This eliminates almost all of the crawling under the loom that is required on most floor looms. If you would like information on this method ask us when you order your loom.

In addition to the above we supply all Toika Looms with the following minimum specification:

• A minimum of 100 Texsolv heddles per shaft as ordered
• A pre cut Texsolv tie up set, or Texsolv cord and pegs to set up using the top of the lamms way
• A stainless steel reed in the dent size of your choice
• Cloth aprons to both warp and cloth beams
• Plywood crate and delivery to a UK mainland address
• A standard Liisa bench

You can amend this to suit your requirements and can also add or change to any of the following options for your loom at the time of ordering:

• Standing beater
• A second warp and back beam with second tension system
• Sectional warp and back beam (as second beam) with second tension system
• Sectional rails (converts a plain beam to sectional)
• A fly shuttle system
• Extra reeds and heddles
• An adjustable height bench
• Warp sticks
• Extra treadles
• Eeva can be both retro fitted or fitted from new with an ES 16 system

Additional warping and weaving equipment as listed in the Toika catalogue. This downloadable catalogue also contains diagrams and  measurements of  all of the Toika floor looms on this website.

Please note additional equipment ordered with looms is unlikely to increase shippings costs significantly, if at all as there is usually space in the crate. Items ordered separately will incur additional shipping  charges, we will notify you of these before you place an order.

All Floor loom prices are based on  an average of Euro to Pound rates. Prices are confirmed when you are ready to place your order.